Linux Cubed Series 2: Applications

home *** CD-ROM | disk | FTP | other *** search

/ Linux Cubed Series 2: Applications / Linux Cubed Series 2 - Applications.iso / editors / emacs / xemacs / xemacs-1.006 / xemacs-1 / lib / xemacs-19.13 / info / new-users-guide.info-1 < prev next >

Wrap

GNU Info File | 1995-09-01 | 48.9 KB | 1,264 lines

This is Info file ../../info/new-users-guide.info, produced by Makeinfo-1.63 from the input file new-users-guide.texi. This file will serve as the User's Manual for the XEmacs editor. Copyright (C) 1985, 1986, 1988 Richard M. Stallman. Copyright (C) 1991, 1992, 1993, 1994 Lucid, Inc. Copyright (C) 1993, 1994 Sun Microsystems, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. File: new-users-guide.info, Node: Top, Next: Intro, Prev: (dir), Up: (dir) The Emacs Editor **************** Emacs is the extensible, customizable, self-documenting real-time display editor. This Info file will help you get started on using XEmacs. It corresponds to XEmacs version 19.13. * Menu: * Intro:: Introduction to XEmacs editor Indices, nodes containing large menus * Key Index:: An item for each standard Emacs key sequence. * Command Index:: An item for each command and function name * Variable Index:: An item for each variable in User-Guide * Concept Index:: An item for the concepts introduced Entering, Exiting and Editing Emacs * Entering:: Starting Emacs from the shell and Exiting * Windows and Menus:: Description of Pull-down menus * Edit:: Basic Editing commands Other Features of XEmacs * Customization Basics:: Customize Emacs menus and keybindings * Help:: Help menu and other help commands * Modes:: Major and Minor modes in XEmacs * Files:: Visiting, Saving and Listing Files * Other Customizations:: Customizing Variables, Modes, etc * Select and Move:: Selecting text and moving text * Search and Replace:: Searching and Replacing text -- The Detailed Node Listing -- Entering and Exiting Emacs * Enter:: Entering Emacs from the shell * Frame:: Basic information about the XEmacs Frame * Exiting:: Exiting Emacs * Mode Line:: Interpreting the mode line. * Echo Area:: Bottom of the frame where you interact with Emacs. XEmacs Windows and Menus * XEmacs Window:: Manipulating XEmacs Windows * Pull-down Menus:: Description of XEmacs Pull-down Menus Pull-down menus * File menu:: Items on the File Menu * Edit menu:: Items on the Edit Menu * Options Menu:: Items on the Options Menu * Buffers Menu:: Items on the Buffers Menu * Help menu:: The Help Menu at the extreme right on the frame Basic Editing Commands * Insert:: Insert text in Emacs by simply typing at the cursor position. * Cursor Position:: Moving Around the cursor in the buffer, * Erase:: Different commands for erasing text * Numeric Argument:: Giving Numeric Arguments to commands * Undo:: Undoing Changes made by mistake Customize key bindings and menus * Customizing key Bindings:: Changing Key Bindings * Customizing Menus:: Adding, Deleting, Enabling and Disabling Menus Help * The Help Menu:: Items on the Help Menu Major and Minor Modes * Major Modes:: Choosing Major Modes * Minor Modes:: Auto-Fill, Abbrev and other minor modes Emacs Files * File Names:: How to type and edit file name arguments. * Visiting:: Visiting a file prepares Emacs to edit the file. * Saving Files:: How to save Emacs files. Other Customizations * Setting Variables:: Customizing Emacs variables * Init File:: Some examples of Lisp expressions in .emacs file Selecting and Moving Text * Selecting Text:: Select a region of text by setting the Mark * Mouse:: Selecting Text with Mouse * Region Operation:: Various ways to operate on a selected text * Moving Text:: Moving Text * Accumulating text:: Accumulating Text from several buffers No sub menu for the node search and replace File: new-users-guide.info, Node: Intro, Next: Key Index, Prev: Top, Up: Top Introduction ************ You are reading about XEmacs which is a self-documenting, customizable, extensible real-time display editor. XEmacs is a "display" editor because normally the text being edited is visible on the screen and is updated automatically as you type. *Note Display: ()Frame. It is a "real-time" editor because the display is updated very frequently, usually after each character or pair of characters you type. This minimizes the amount of information you must keep in your head as you edit. *Note Real-time: ()Basic. It is advanced because it provides facilities that go beyond simple insertion and deletion: filling of text; automatic indentation of programs; viewing two or more files at once; and dealing in terms of characters, words, lines, sentences, paragraphs, and pages, as well as expressions and comments in several different programming languages. It is much easier to type one command meaning "go to the end of the paragraph" than to find that spot with simple cursor keys. "Self-documenting" means that at any time you can type a special character, `Control-h', to find out what your options are. You can also use `C-h' to find out what a command does, or to find all the commands relevant to a topic. *Note Help: ()Help. "Customizable" means you can change the definitions of Emacs commands. For example, if you use a programming language in which comments start with `<**' and end with `**>', you can tell the Emacs comment manipulation commands to use those strings (*note Comments: ()Comments.). Another sort of customization is rearrangement of the command set. For example, you can set up the four basic cursor motion commands (up, down, left and right) on keys in a diamond pattern on the keyboard if you prefer. *Note Customization: ()Customization. "Extensible" means you can go beyond simple customization and write entirely new commands, programs in the Lisp language to be run by Emacs's own Lisp interpreter. Emacs is an "on-line extensible" system: it is divided into many functions that call each other. You can redefine any function in the middle of an editing session and replace any part of Emacs without making a separate copy of all of Emacs. Most of the editing commands of Emacs are written in Lisp; the few exceptions could have been written in Lisp but are written in C for efficiency. Only a programmer can write an extension to Emacs, but anybody can use it afterward. File: new-users-guide.info, Node: Entering, Next: Windows and Menus, Prev: Concept Index, Up: Top Entering and Exiting Emacs ************************** While using Emacs you should be familiar with the following three terms: Buffer A buffer is a region of memory holding characters. It is the basic editing unit; one buffer corresponds to one piece of text being edited. You can have multiple buffers but you can edit only one buffer at any one time. For more information, *Note Buffers: ()Buffers. File A file is a region of disk space holding characters. Emacs edits a file by reading it into a buffer, editing that buffer and writing out the buffer back to the file. To save your work permanently you have to write it to a file. So after you load and work with a file, you have to save it back. Windows A window is a rectangular region in which a buffer is displayed. You can open multiple windows with multiple buffers and edit them by selecting the corresponding buffer. Initially, when you start emacs, it will automatically open up a window for you. * Menu: * Enter:: Entering Emacs from the shell * Frame:: Basic information about the XEmacs Frame * Exiting:: Exiting Emacs * Mode Line:: Interpreting the mode line. * Echo Area:: Bottom of the frame where you interact with Emacs. File: new-users-guide.info, Node: Enter, Next: Frame, Prev: Entering, Up: Entering Entering Emacs ============== To enter Emacs type `xemacs' and press the Return key at the shell i.e. `xemacs RET'. This will bring up an emacs window with `*scratch*' as the default buffer because Emacs must always have a buffer to work on. Then choose the Open... option from the File menu on the menubar at the top of the frame. It will prompt you to enter a filename. After you enter the filename, Emacs will read that file into the current buffer. You can also type : `xemacs <filename> RET' directly which will bring up an Emacs frame with the "filename" as the buffer. File: new-users-guide.info, Node: Frame, Next: Exiting, Prev: Enter, Up: Entering Emacs Frame =========== When you run XEmacs under X, a menu bar on top of the Emacs frame provides access to pull-down menus of file, edit, and help-related commands. The menus only provide convenient shortcuts, the options that they provide are available via key commands. You can invoke those commands from the keyboard also. For many of the options, their corresponding key commands are displayed right besides them. The five default menus on the menubar that you will see on the frame are File, Edit, Options, Buffers and Help. *Note XEmacs Pull-down Menus: ()XEmacs Pull-down Menus, for detailed information on the functions provided by the pull-down menus. The Emacs frame has a rectangle shaped box at the extreme right and you can drag it up or down to scroll the window accordingly. Clicking on the arrows also serves the same purpose. The last line in your window is `the Mode line' which will give you a description of what's going on in that particular window. *Note Mode Line::, for more information. Below the mode line is the `Echo area'. Emacs uses this area to interact with the user. *Note Echo Area::. If you wish to open another file in a new window after you enter XEmacs, select Open in New Frame... from the File menu, which will prompt you for a filename and open a new window with that filename as the current buffer. If you want to open a new file in the same window, select Open.. from the File menu. You need to enter XEmacs only once, you can edit multiple files by opening several other frames or by switching between buffers. File: new-users-guide.info, Node: Exiting, Next: Mode Line, Prev: Frame, Up: Entering Exiting Emacs ============= There are two commands for exiting Emacs, one for "suspending" Emacs and the other for "killing" Emacs. "Suspending" means stopping Emacs temporarily and returning control to the shell, allowing you to resume editing later in the same Emacs job, with the same files, same kill ring, same undo history, and so on. This is the usual way to exit. "Killing" Emacs means destroying the Emacs job. You can run Emacs again later, but you will get a fresh Emacs; there is no way to resume the same editing session after it has been killed. `C-z' Suspend Emacs (`suspend-emacs'). If used under the X window system, this command will shrink the X window containing the Emacs frame to an icon. Clicking on the icon will resume that Emacs process again. *Note Exiting Emacs: ()Exiting Emacs. `C-x C-c' Kill Emacs (`save-buffers-kill-emacs'). You can also select Exit Emacs option from the File menu to kill that Emacs process. If you haven't saved the file, Emacs will ask you if you wish to save the file before killing that process. File: new-users-guide.info, Node: Mode Line, Next: Echo Area, Prev: Exiting, Up: Entering The Mode Line ============= When you enter XEmacs, each text window's last line is a "mode line" which describes what is going on in that window. Normally, the mode line looks like : --CH-XEmacs: BUF (MAJOR MINOR)----POS------ This gives information about the buffer being displayed in the window: the buffer's name, what major and minor modes are in use, whether the buffer's text has been changed, and how far down the buffer you are currently looking. The CH contains : `**' if the text in the buffer has been edited `--' if the text in the buffer has not been edited `%%' if the buffer is a read-only-buffer i.e. it cannot be edited BUF is the name of the window's chosen "buffer". If you are editing a file (which is the selected buffer), the file name appears in BUF. *Note Buffers: ()Buffers. POS contains : `All' if your entire file is visible on the screen. `Top' if you are looking at the beginning of the file. `Bot' if you are looking at the end of the file. `NN%' NN will be a number corresponding to the percentage of the file above the top of the screen, for example `52', which means that 52% of the file is above the top of the screen. MAJOR is the name of the "major mode" in effect in the buffer. At any time, each buffer is in one and only one major mode. The available major modes include Fundamental mode (the least specialized), Text mode, Lisp mode, and C mode. *Note Major Modes: ()Major Modes, for details on how the modes differ and how you select one. MINOR is a list of some of the "minor modes" that are turned on in the window's chosen buffer. For example, `Fill' means that Auto Fill mode is on which means that lines are broken automatically when they become too wide. *Note Minor Modes: ()Minor Modes, for more information on various minor modes and how to enable them. You can also display time in the mode line. *Note The Mode Line: ()The Mode Line, for more information regarding the mode line. File: new-users-guide.info, Node: Echo Area, Prev: Mode Line, Up: Entering The Echo Area ============= The line at the bottom of the frame (below the mode line) is the "echo area". Emacs uses this area to communicate with you: * The "echo area" will print out the characters that you type. For example, if you choose the Open... option from the File menu you might get the following in the echo area: Find file: /usr/lib/x11/ Now you need to give a file name to open, for example if the file name is `myfile', you will type `myfile' after `/usr/lib/x11/' and press the Return key. If you pause for more than a second while typing, you will see the characters that you type in the "echo area". * The "echo area" also prints error messages. For example, if you misspell `usr' and type `/urs/lib/x11/myfile' RETURN in the above example you might get an error message. Since Emacs will not be able to find the `/urs' directory, the "echo area" will say: error--> Opening directory: no such file or directory, /urs/lib/x11/myfile This error message will be accompanied by a beep. Some XEmacs commands will print informative messages in the "echo area". *Note The Echo Area: ()The Echo Area, for more information on the "echo area". File: new-users-guide.info, Node: Windows and Menus, Next: Edit, Prev: Entering, Up: Top XEmacs Windows and Menus ************************ The first section of this chapter will show you how you can manipulate XEmacs Windows and the other section will explain the Pull-down Menus of an XEmacs window. * Menu: * XEmacs Window:: Manipulating XEmacs Windows * Pull-down Menus:: Description of XEmacs Pull-down Menus File: new-users-guide.info, Node: XEmacs Window, Next: Pull-down Menus, Prev: Windows and Menus, Up: Windows and Menus XEmacs Windows ============== When you use XEmacs under X, you can open multiple windows and each window can display one buffer or multiple parts of one buffer. Each window will have its own "mode line" and "echo area". At any one time there is only one "selected window" and the buffer it displays is the "selected buffer". There are some commands for manipulating windows: `M-C-v' This command will scroll the window which is not "selected" (`scroll-other-window'). `C-x 0' This command will get rid of the selected window (`delete-window'). That is a zero. If there is more than one Emacs frame, deleting the sole remaining window on that frame deletes the frame as well. If the current frame is the only frame, it is not deleted. `C-x 1' This command will get rid of all the windows except the selected one. (`delete-other-windows'). For example, if you use the Describe variable option from the Help menu, the window will split vertically and the bottom window will contain documentation for that variable. After you are done looking at that variable's documentation you might want to come back to your original single window. Just type `C-x 1' after your cursor is in the top window (the window which you want to keep) and hit RET. `C-x 2' This command will split the selected window into two windows, one above the other (`split-window-vertically'). Both the windows will start out by displaying the same buffer. The window in which you have your cursor will be your "selected window". `C-x 3' This will split the selected window into two windows positioned side by side (`split-window-horizontally'). A line of vertical bars will separate the window. You can select a buffer in another window by using some other commands. These commands all have a prefix key `C-x 4' `C-x 4 b BUFNAME RET' This command will select a buffer BUFNAME in another window. This runs `switch-to-buffer-other-window'. It will prompt you for a buffername. `C-x 4 f FILENAME RET' Visit file FILENAME and select its buffer in another window. This runs `find-file-other-window'. *Note Visiting: ()Visiting. It will prompt you for a filename. `C-x 4 d DIRECTORY RET' Select a Dired buffer for directory DIRECTORY in another window. This runs `dired-other-window'. *Note Dired: ()Dired. `C-x 4 m' Start composing a mail message in another window. This runs `mail-other-window', and its same-window version is `C-x m'. *Note Sending Mail: ()Sending Mail, for information on how to Send Mail using XEmacs. *Note Reading Mail With Rmail: ()Reading Mail With Rmail, for information on reading mail using Rmail. If you click the right button on the mouse on a mode line, you will get a menu with following options: Delete Window Choosing this menu will remove the window above this modeline from the frame. Delete Other Windows Delete all windows on the frame except for the one above this modeline. Split Window Split the window above the mode line in half, creating another window. Split Window Horizontally Split the window above the mode line in half horizontally, so that there will be two windows side-by-side. Balance Windows Readjust the sizes of all windows on the frame until all windows have roughly the same number of lines. File: new-users-guide.info, Node: Pull-down Menus, Prev: XEmacs Window, Up: Windows and Menus XEmacs Pull-down Menus ====================== When you run XEmacs under X, each Emacs frame has a menu-bar at the top which provides commands for editing, help and other options. All these options are also available via key commands, the menus just provide convenient short-cuts. The key commands are displayed right besides some of the the options. The following is a brief description of the four default menus on the menu bar: * Menu: * File menu:: Items on the File menu * Edit menu:: Items on the Edit menu * Options Menu:: Items on the Options Menu * Buffers Menu:: Items on the Buffers Menu * Help menu:: The Help Menu at the extreme right on the frame File: new-users-guide.info, Node: File menu, Next: Edit menu, Prev: Pull-down Menus, Up: Pull-down Menus The File Menu ------------- The File menu bar contains the following items. To choose a particular option, press the left mouse button and drag it to the item you wish to select. Then release the button. Open... This option will prompt you for a file name. You will get a message in the echo area: Find File: After Find File, there might be a directory path also. After you type the file name and press RET the file will be loaded into a new buffer. Open in New Frame... It prompts you for a file name and loads that file in a new buffer in a new frame. You can open many frames for the same Emacs session. You can delete the frame by selecting Delete Frame. Insert File... Prompts you for a filename and inserts the contents of this filename in your current buffer. Position your cursor at the place you wish to insert the file and select this option. You will get the following message in the echo area: Insert file: Insert the file name and press RET. Save <Buffername> It saves the changes you have made to the buffer. If you have made changes which are not saved yet, the option will appear dark, otherwise it will be light and unselectable. If you do not wish to save the changes, select Revert Buffer. Save As... Prompts you for a filename and saves the current buffer in that file. It loads the new file if the filename you specify is different from the one you were working with. Print Buffer <buffername> Prints a hardcopy of the current or "selected" buffer. New Frame Opens a new frame with *scratch* as the default buffer. It doesn't prompt you for a filename. To open a file you need to go to that frame and select Open... Split Frame Splits the current window into two equal-sized windows with the same buffer. To get back a single frame, select Un-Split (Keep This). *Note XEmacs Window::, for more information about windows. Un-Split (Keep This) If the frame contains multiple windows, it will remove all windows except the selected one. Un-Split (Keep Others) If the frame contains multiple windows, it will remove the selected window and keep the other one. Revert Buffer <buffername> If you do not wish to save the changes you made to the file since you opened it, select this option. It will restore the last saved version of the file to the current buffer. Kill Buffer <buffername> It will kill the current buffer. If will prompt you if there are unsaved changes. Exit Emacs It will kill the Emacs "process" as opposed to simply killing the "buffer". Before it kills the process, it will prompt you as to which unsaved buffers you wish to save by going through the list of the buffers. * Menu: * Edit menu:: Items on the Edit Menu * Options Menu:: Items on the Options Menu * Buffers Menu:: Items on the Buffers Menu * Help menu:: The Help Menu at the extreme right on the frame File: new-users-guide.info, Node: Edit menu, Next: Options Menu, Prev: File menu, Up: Pull-down Menus The Edit Menu ------------- Most of the commands in this menu work on a block of text or a selected region. The text will be highlighted as you select it. Undo Undoes the previous command. If you type something by mistake you can use this command. For example, if you select Insert File... from the File menu and insert a wrong file by mistake, you can select this item and it will remove the inserted file. It undoes a batch of text which is worth an emacs command. Cut Removes the selected text block from the current buffer, makes it the X clipboard selection, and places it in the kill ring (*note Moving Text::.). Before executing this command, you have to select a region using Emacs region selection commands or with the mouse. *Note Selecting Text::. Copy Makes a selected text block the X clipboard selection, and places it in the kill ring. You can select text using one of the Emacs region selection commands or by selecting a text region with the mouse. *Note Selecting Text::, for more information. Paste Inserts the current value of the X clipboard selection in the current buffer. Note that this is not necessarily the same as the Emacs `yank' command, because the Emacs kill ring and the X clipboard selection are not the same thing. You can paste in text you have placed in the clipboard using Copy or Cut. You can also use Paste to insert text that was pasted into the clipboard from other applications. *Note X Clipboard Selection: ()X Clipboard Selection, for information on using Clipboard Selection. Clear Removes the selected text block from the current buffer but does not place it in the kill ring or the X clipboard selection. You will not be able to get this text back. Start Macro Recording After selecting this, Emacs will remember every keystroke you type until End Macro Recording is selected. End Macro Recording Selecting this tells emacs to stop remembering your keystrokes. Execute Last Macro Selecting this item will cause emacs to re-interpret all of the keystrokes which were saved between selections of the Start Macro Recording and End Macro Recording menu items. You can now execute the most recent keyboard macro. *Note Keyboard Macros: ()Keyboard Macros, for further information. File: new-users-guide.info, Node: Options Menu, Next: Buffers Menu, Prev: Edit menu, Up: Pull-down Menus The Options Menu ---------------- There are sub-menus for some of the menus which you will need to select. If sub-menus exist for an item, they will be displayed automatically when you drag the mouse on that item. The items in this menu provide some fancy editing operations. Read Only Selecting this item will cause the buffer to visit the file in a read-only mode. Changes to the file will not be allowed. Case Sensitive Search Selecting this item will cause searches to be case-sensitive. If its not selected then searches will ignore case. This option is local to the buffer. For example, if this item is selected and you are searching for `Smile', then an occurrence of `smile' will not be recognized because of the smaller case of `s'. Overstrike After selecting this item, when you type letters they will replace existing text on a one-to-one basis, rather than pushing it to the right. At the end of a line, such characters extend the line. Before a tab, such characters insert until the tab is filled in. Auto Delete Selection Selecting this item will cause automatic deletion of the selected region. After you select a region and hit the RET key, the selected text will be deleted. The typed text will replace the selection if the selection is active (i.e. if its highlighted). If the option is not selected then the typed text is just inserted at the cursor. Teach Extended Commands After you select this item, any time you execute a command with `M-x' which has a shorter keybinding, you will be shown the alternate binding before the command executes. For example if you type `M-x find-file-other-window' which performs the same function as the Open in New Frame... in File menu you will see the following message: M-x find-file-other-frame (bound to keys: C-x 4 f, C-x 4 C-f) Syntax Highlighting You can customize your `.emacs' file to include the font-lock mode so that when you select this item, the comments will be displayed in one face, strings in another, reserved words in another, and so on. *Note Customization: ()Customization, for more information on customizing `.emacs' file. After selecting this item, you will find your code a lot easier to read. When Fonts is selected, different parts of the program will appear in different Fonts. When Colors is selected, then the program will be displayed in different colors. Selecting None causes the program to appear in just one Font and Color. Selecting Less resets the Fonts and Colors to a fast, minimal set of decorations. Selecting More resets the Fonts and Colors to a larger set of decorations. For example, if Less is selected (which is the default setting) then you might have all comments in green color. It does not matter what the comments contain. Whereas, if More is selected then a function name in the comments themselves might appear in a different Color or Font. Even though the comments themselves might appear in green color, a function name "within" the comments might appear in red color. Paren Highlighting After selecting Blink from this item, if you place the cursor on a parenthesis, the matching parenthesis will blink. If you select Highlight and place the cursor on a parenthesis, the whole expression of the parenthesis under the cursor will be highlighted. Selecting None will turn off the options (regarding Paren Highlighting) which you had selected earlier. Font You can select any Font for your program by choosing from one of the available Fonts. The whole buffer will be converted to the Font you select. Size You can select any size for the text in your buffer (ranging from 2 to 24) by selecting the appropriate option. Weight You can choose either Bold or Medium for the weight of the text of your buffer. Buffers Menu Length... Prompts you for the number of buffers to display. Then it will display that number of most recently selected buffers. Buffers Sub-Menus After selection of this item the Buffers menu will contain several commands, as submenus of each buffer line. If this item is unselected, then there are no submenus for each buffer line, the only command available will be selecting that buffer. Save Options Selecting this item will save the current settings of your Options menu to your `.emacs' file so that the next time you start XEmacs, you won't need to select the options again. File: new-users-guide.info, Node: Buffers Menu, Next: Help menu, Prev: Options Menu, Up: Pull-down Menus The Buffers Menu ---------------- The Buffers menu provides a selection of up to ten buffers and the item List All Buffers, which provides a Buffer List. If you select Buffers Sub-menus from the Options menu, you will get some sub-menus for each of the buffer listing. File: new-users-guide.info, Node: Help menu, Prev: Buffers Menu, Up: Pull-down Menus The Help Menu ------------- The Help Menu gives you access to Emacs Info and provides a menu equivalent for some of the choices you have when using `C-h'. *Note Help::, for more information. The Describe variable and Describe function will provide documentation for the corresponding variable or function. The Help menu also gives access to UNIX online manual pages via the UNIX Manual... option. File: new-users-guide.info, Node: Edit, Next: Customization Basics, Prev: Windows and Menus, Up: Top Basic Editing Commands ********************** This chapter will introduce you to some basic editing commands. You can also learn the basic editing commands by typing `Control-h t' (`help-with-tutorial' OR by selecting Emacs Tutorial from the Help menu on the menu bar. Most of the Emacs commands will use the CONTROL key or the META key. The following abbreviations will be used for the CONTROL and META key in this manual: `C-<chr>' This means that you should hold down the CONTROL key while typing `<chr>'. For example, if the command is `C-g', you should hold the CONTROL key and type g. `M-<chr>' This means that you should hold down the `META' key while typing `<chr>'. If there is no `META' key on your keyboard, use the `ESC' key instead. For example, if the command is `M-x', then type `ESC', release it and type `x'. The following abbreviations will be used for some other keys: SPC Space bar. RET Return key. LFD Linefeed key. TAB Tab. ESC Escape. SFT Shift. * Menu: * Insert:: Insert text in Emacs by simply typing at the cursor position. * Cursor Position:: Moving Around the cursor in the buffer, * Erase:: Different commands for erasing text * Numeric Argument:: Giving Numeric Arguments to commands * Undo:: Undoing Changes made by mistake File: new-users-guide.info, Node: Insert, Next: Cursor Position, Prev: Edit, Up: Edit Inserting Text ============== To insert printing characters into the text you are editing, just type them. Emacs will automatically insert the characters that you type into the buffer at the cursor. The cursor moves forward, but if you prefer to have text characters replace (overwrite) existing text characters, you can enable the Overstrike option from the Options menu in the menu bar. To "delete" text you have just inserted, use DEL. DEL deletes the character BEFORE the cursor (not the one that the cursor is on top of or under; that is the character AFTER the cursor). The cursor and all characters after it move backwards. Therefore, if you type a printing character and then type DEL, they cancel out. To end a line and start typing a new one, type RET. This inserts a newline character in the buffer. If point is in the middle of a line, RET splits the line. Typing DEL when the cursor is at the beginning of a line rubs out the newline before the line, thus joining the line with the preceding line. Emacs automatically splits lines when they become too long, if you turn on a special mode called "Auto Fill" mode. *Note Filling: ()Filling, for information on using Auto Fill mode. File: new-users-guide.info, Node: Cursor Position, Next: Erase, Prev: Insert, Up: Edit Moving Around ============= The following commands will allow you to move the cursor around the screen. The actual function names corresponding to these commands are given in parenthesis. You can also invoke these commands by typing `M-x <function name>'. You can do this for any command in XEmacs. `C-b' Move the cursor backward one character (`backward-char'). `C-f' Move the cursor forward one character (`forward-char'). `C-p' Move the cursor up one line vertically (`previous-line'). `C-n' Move the cursor down one line vertically (`next-line'). `C-a' Move the cursor to the beginning of the line (`beginning-of-line'). `C-e' Move the cursor to the end of the line (`end-of-line'). `M-f' Move the cursor forward one word (`forward-word'). `M-b' Move the cursor backword one word (`backward-word'). `M-<' Move the cursor to the top of the buffer (`beginning-of-buffer'). `M->' Move the cursor to the end of the buffer (`end-of-buffer'). `M-x goto-char RET <number> RET' To enable this command type `M-x goto-char', and hit RETURN key. In the "echo area" you will see: Goto char: You should then type in a number right after the colon and hit the `RETURN' key again. After reading a number N this command will move the cursor to character number N. Position 1 is the beginning of the buffer. For example, if you type `M-x goto-char RET 200 RET', then the cursor will move to the 200th character starting from the beginning of the buffer. `M-x goto-line RET <number> RET' To enable this command type `M-x goto-line', and hit the RETURN key. After you see `Goto line:' in the "echo area", type in a number N and hit RETURN key again. This command will position the cursor on the nth line starting from the beginning of the buffer. `M-x what-line RET' This command will display the current line number in the echo area. File: new-users-guide.info, Node: Erase, Next: Numeric Argument, Prev: Cursor Position, Up: Edit Erasing Text ============ `DEL' If you press DEL i.e. the "delete" key, it will delete the character before the cursor (`delete-backward-char'). `C-d' This will delete the character after the cursor (`delete-char'). `C-k' Kill to the end of the line (`kill-line'). If you kill the line by mistake you can "yank" or `paste' it back by typing `C-y'. *Note Moving Text::, for more information on yanking. `M-d' Kill forward to the end of the next word (`kill-word'). `M-DEL' Kill back to the beginning of the previous word (`backward-kill-word'). `M-k' Kill to the end of current sentence (`kill-sentence'). `M-z CHAR' Kill up to next occurrence of CHAR (`zap-to-char'). To use this command type `M-z'. You will see the following statement in the echo area : Zap to char: Type any char and press the RET key. For example, if you type `p' then the entire text starting from the position of the cursor until the first occurrence of `p' is killed. File: new-users-guide.info, Node: Numeric Argument, Next: Undo, Prev: Erase, Up: Edit Giving Numeric Arguments ======================== Any Emacs command can be given a "numeric argument". Some commands interpret the argument as a repetition count. For example, if you want to move forward ten characters, you could type `C-f' ten times. However, a more efficient way to do this would be to give an argument of ten to the key `C-f' (the command `forward-char', move forward one character). Negative arguments are also allowed. Often they tell a command to move or act backwards. For example, if you want to move down ten lines, type the following: C-u 10 C-n RET After you press RET key, the cursor will move ten lines downward. You can also type: M-10 C-n RET Both `C-u' and `M-' allow you to give numeric arguments. If you want to move ten lines backward, you can also give negative arguments, like: C-u -10 C-n RET OR you could also type: M--10 C-n RET You can obviously use `C-b' to move backward rather than giving negative arguments to `C-n'. *Note Numeric Arguments: ()Numeric Arguments, for more information on numeric arguments. File: new-users-guide.info, Node: Undo, Prev: Numeric Argument, Up: Edit Undoing Changes =============== When you are editing a buffer, you might type something by mistake. Emacs allows you to undo all changes you make to a buffer (but not more than 8000 characters). Each buffer in Emacs keeps a record of the changes made to it individually, so the undo command applies to the current buffer. There are two undo commands: `C-x u' Undo one batch of changes (usually, one command's worth). (`undo'). `C-_' The same as above, but this command might not be obvious to type on some keyboards so it might be better to use the above command. *Note Undoing Changes: ()Undoing Changes, for more information on undoing changes. File: new-users-guide.info, Node: Customization Basics, Next: Help, Prev: Edit, Up: Top Customize key bindings and menus ******************************** When you start Emacs, it reads the file `~/.emacs' in your home directory. You can use this file to initialize and customize Emacs to your liking. This file should contain lisp-code. You can customize your `.emacs' file to create new menus, disable menus, change key bindings, enable a minor mode, etc. Any kind of customization affects only a particular Emacs job that you do them in. If you want to save your customizations `permanently' i.e. for future use also, you have to put it in your `.emacs' file. After you make changes to your `.emacs' file and save it, the changes will be effective only after you start Emacs again i.e. for a new Emacs process. To try out some of the examples in this section, highlight that region and evaluate the region by giving the command `M-x eval-region'. You will be able to see the results of your customizations in that Emacs session only (*note Lisp Eval: ()Lisp Eval.). * Menu: * Customizing key Bindings:: Changing Key Bindings * Customizing Menus:: Adding, Deleting, Enabling and Disabling Menus File: new-users-guide.info, Node: Customizing key Bindings, Next: Customizing Menus, Prev: Customization Basics, Up: Customization Basics Customize key bindings ====================== Most of Emacs commands use key sequences. *Note Keystrokes: ()Keystrokes, for more information about Keys and Commands. In Emacs, the keys themselves carry no meaning unless they are bound to a function. For example, `C-n' moves the cursor to the next line because its bound to the function next-line. Similarly, `C-p' moves to the previous line because its bound to the function previous-line. The functions themselves define a particular behavior. You can customize the key `C-n' to move to the previous line by binding it to previous-line and `C-p' to move to the next line by binding it to next-line. To bind keys to globally run commands you need to use the following syntax in your .emacs file: `(global-set-key KEYS CMD)' Here, `global-set-key' is a function which will bind the "keys" to the specified "cmd". For example, if you type the following in your .emacs file: (global-set-key "\C-p" 'next-line) (global-set-key "\C-n" 'previous-line) then `C-p' will move to the next line and `C-n' to the previous line. You can also disable a key binding, by using `nil' as the CMD in the syntax stated above. Here, `nil' stands for `false' which means disable a command or turn off a feature. If you want to enable a command or turn on a particular feature use `t' which stands for `true'. For example, if you do not wish `C-x C-c' to `Exit Emacs' you can type the following expression in your `.emacs' file: (global-set-key "\C-x\C-c" nil) You might want to have this statement in your `.emacs' file because its easy to hit this command by mistake and it could be annoying to exit Emacs unintentionally. There is a Exit Emacs option in the File menu which you might want to use instead. To make a particular key undefined you can also use: (global-unset-key "\C-x\C-c") Now if you use the command `C-x C-c', you will get an error saying that the command is undefined. Some other customizations you could try are: * (global-set-key 'button3 'beginning-of-buffer) Now when you press the third button of your mouse, the cursor will be placed at the `beginning-of-buffer'. * (global-set-key 'f1 'goto-line) If you press the F1 key, you will be prompted for a line number. After you type the line number and hit RET, the cursor will be placed on that line number. * (global-set-key 'f2 'undo) Pressing F2 will undo the last command. If you have a undo key on your keyboard, try binding that key to the undo command. Another syntax for customizing key bindings is: `(define-key KEYMAP KEYS DEF)' It defines KEYS to run DEF in the keymap KEYMAP. KEYMAP is a keymap object which records the bindings of keys to the commands that they run. KEYS is the sequence of keystrokes to bind. DEF is anything that can be a key's definition: Look at the following two examples: (define-key global-map "\C-xl" 'make-symbolic-link) (define-key c-mode-map "\C-xl" 'make-symbolic-link) Both the examples bind the key `C-xl' to run the function `make-symbolic-link' (*note Misc File Ops: ()Misc File Ops.). However, the second example will bind the key only for C mode. *Note Major Modes: ()Major Modes, for more information on Major Modes in XEmacs. File: new-users-guide.info, Node: Customizing Menus, Prev: Customizing key Bindings, Up: Customization Basics Customizing Menus ================= You can customize any of the XEmacs Pull-down-Menus. You can create your own menu, delete an existing one, enable a menu or disable a menu. For more information on the default menus available to you, *Note Pull-down Menus::. Some of the functions which are available to you for customization are: 1. add-menu-item: (MENU-NAME ITEM-NAME FUNCTION ENABLED-P &OPTIONAL BEFORE) This function will add a menu item to a menu, creating the menu first if necessary. If the named item already exists, the menu will remain unchanged. For example, if you add the following example to your `.emacs' file or evaluate it (*note Customization Basics::.), (add-menu-item '("Edit") "Replace String" replace-string t "Clear") a sub-menu Replace String will be created under Edit menu before the sub-menu Clear. The Edit menu will now look like: Undo C-x u Cut cut Copy copy Paste paste Replace String Clear Start Macro Recording C-x( End Macro Recording C-x) Execute Last Macro C-xe Replace String will now execute the function `replace-string'. Select this menu item. Emacs will prompt you for a string name to be replaced. Type a string and hit RET. Now type a new string to replace the old string and hit RET. All occurrences of the old string will be replaced by the new string. In this example, `Edit' is the MENU-NAME which identifies the menu into which the new menu item should be inserted. `Replace String' is the ITEM-NAME which names the menu item to be added. `replace-string' is the FUNCTION i.e. the command to be invoked when the menu item "Replace String" is selected. `t' is the ENABLED-P parameter which controls whether the menu item is selectable or not. This parameter can be either `t' (selectable), `nil' (not selectable), or a form to evaluate. This form is evaluated just before the menu is displayed, and the menu item will be selectable if the form returns non-`nil'. `Clear' is the &OPTIONAL BEFORE parameter which is the name of the menu before which the new menu or sub-menu should be added. The &OPTIONAL string means that this parameter is optional. You do not need to specify this parameter. If you do not specify this parameter in the example above, the Replace String menu item will be added at the end of the list of sub-menus in the Edit menu i.e. after Execute Last Macro. If you wish to add a new menu to the menubar, try: (add-menu-item nil "Bot" 'end-of-buffer t) This will create a new menu Bot on the menu bar. Selecting this menu will take you to the end of the buffer. Using `nil' for the parameter MENU-NAME will create a new menu. Your menu-bar will now look like: File Edit Options Buffers Bot Help The following example will illustrate how you can add sub-menus to the submenus themselves: (add-menu-item '("File" "Management") "Copy File" 'copy-file t) (add-menu-item '("File" "Management") "Delete File" 'delete-file t) (add-menu-item '("File" "Management") "Rename File" 'rename-file t) This will create a sub-menu Management under the File menu. When you select the submenu Management, it will contain three submenus: Copy File, Delete File and Rename File. 2. delete-menu-item: (MENU-PATH) This function will remove the menu item defined by MENU-NAME from the menu hierarchy. Look at the following examples and the comments just above them which specify what the examples do. ;; deletes the "Replace String" menu item created earlier (delete-menu-item '("Edit" "Replace String")) ;; deletes the "Bot" menu created earlier (delete-menu-item '("Bot")) ;; deletes the sub-menu "Copy File" created earlier (delete-menu-item '("File" "File Management" "Copy File")) ;; deletes the sub-menu "Delete File" created earlier (delete-menu-item '("File" "Management" "Delete File")) ;; deletes the sub-menu "Rename File" created earlier (delete-menu-item '("File" "Management" "Rename File")) 3. disable-menu-item: (MENU-NAME) Disables the specified menu item. The following example (disable-menu-item '("File" "Management" "Copy File")) will make the Copy File item unselectable. This menu-item would still be there but it will appear faded which would mean that it cannot be selected. 4. enable-menu-item: (MENU-NAME) Enables the specified previously disabled menu item. (enable-menu-item '("File" "Management" "Copy File")) This will enable the sub-menu Copy File, which was disabled by the earlier command. 5. relabel-menu-item: (MENU-NAME NEW-NAME) Change the string of the menu item specified by MENU-NAME to NEW-NAME. (relabel-menu-item '("File" "Open...") "Open File") This example will rename the Open... menu item from the File menu to Open File.